Window Maintenance Tips for Home Safety

Window Maintenance Tips for Home Safety – One of the major areas people overlook when it comes to home maintenance, are their windows. However, window maintenance should be something that you conduct during your weekly house care routine.

By ensuring that your windows stay in good condition, it will extend their longevity. Just like every aspect of your home, your windows need regular maintenance to ensure that they operate at full capacity.

Maintaining your windows consist of doing more than just looking at the windows. In this post, we provide 7 window maintenance tips for home safety.

1) Window Frame And Panel Cleaning

The first step in maintaining your windows is to clean them. Environmental factors affect the interior and exterior portion of your windows. As such they should be cleaned on a regular basis.

You can start by cleaning the frames with a solution of warm water and a mild detergent. Ideally, you should use something soft such as a sponge or cloth to avoid scratching the window.

Once you have cleaned it, ensure that you wipe it down with a dry rag to avoid rust related deterioration.

2) Track And Rollers

Another aspect of the window people overlook are the tracks and rollers. The tracks and rollers are located on the frame of the door. The problem with them is that they are prone to accumulating debris, dirt moisture build-up and spider weds.

This is especially the case when it comes to sliding windows, as debris on the tracks can cause it to jam. So ensure that you keep the tracks and rollers in good health. In addition to that, apply WD-40 to ensure that it continues to function.

3) Lubrication

Casement windows have various hardware components such as metal handles, locks, hinges, and other components. This care critical to the functioning of your windows. These need to be well lubricated to ensure that they continue to function smoothly.

WD-40 is the preferred lubricant of choice amongst millions of homeowners. You can use this to lubricate the hardware components of your windows.

4) Replace Cracked Windows

Chances are that if you have a small crack in your window, you may avoid replacing it. Needless to say, over time, this will cause your HVAC system to work harder and raise your electricity bill.

As such, it may actually be more cost-effective for you to replace them. As opposed to paying a higher bill, month after month. Therefore, ensure that you replace cracked windows, regardless of how small the cracks may be.

5) Evaluate Weather Stripping

It’s natural for weather stripping to wear down over time. Especially if you open and close your window frequently. Therefore, determine if you may need to replace your window’s weather stripping.

In the event that they are still in good shape, check for debris to ensure that it stays in good shape. Weatherstripping is important as it helps your window to keep moisture out. It also helps to preserve the energy efficiency of the windows.

6) Check Sealant.

When it comes to maintaining your windows, evaluate the areas around the window frame. If there is a gap in the frame, you may need to cover that gap with a water resistant sealant.

In the event that it already has sealant poured in various sections, check to ensure that it hasn’t deteriorated. These gaps can allow moisture to enter your home and negatively affect the energy efficiency of the entire house.

7) Evaluate Imperfections in Wood Finishes

Your window may have a beautiful wood finish. But, it’s important to remember that its function isn’t just to make your window look nice. It is supposed to protect your windows from the elements as well.

Unfortunately, UV rays from the sun damage wood finish over time. This can compromise the protection it provides to your windows. Therefore, check for signs of corrosion such as cracking or peeling.

If you find imperfections, you can fix it by refinishing the wood. A good window maintenance company can provide professional advice on how to do just that.